Bed Head Unit Planning for Hospital Rooms
A bed head unit brings medical gases, power and low-voltage services to the head of the patient bed. Huifeng Medical, established in 1992 in Shanghai, manufactures SHANGYI and HFMED bed head units configured per quotation.
Request a quote for this equipment
- Established
- 1992
- Production lines
- More than 10
- Sales
- More than 50 countries

Bed Head Unit Planning for Hospital Rooms
A bed head unit is the bedhead service assembly used in patient rooms: a unit mounted at the head of the bed that groups medical gas outlets, electrical sockets and low-voltage services at the point of use. Room briefs differ, so the required configuration is confirmed per quotation. Huifeng Medical was established in 1992 in Shanghai and manufactures bed head units under the SHANGYI and HFMED brands.
The range includes several designs: Bed Head Panel in Hospital, Bed Head Panel For ICU, Bed Head Unit Hospital, Hospital Bed Head and Bed Head Panel For Hospitals. Each has its own specification table, and the columns differ between models, so details from a model do not describe the whole range. Send the room schedule, gas and power requirements and the quantities needed through the inquiry form or the sales contact to receive a quotation.
Huifeng Medical is a manufacturer with 3 factories, each focused on a different product line, and more than 10 production lines. The main range also includes surgical lights, medical pendants, operating tables, hospital beds and air mattresses for ward and critical-care rooms.

Two slim bed head panels stacked vertically 
Wall-mounted panel beside an IV pole
Bed head unit models and specifications
| Parameter | Value |
|---|---|
| Column Length | 1400 mm +/- 5% |
| Electrical sockets | 8 outlets (2 separate circuits, each with 4 outlets, color coded) |
| RJ-45 socket | 2 |
| Terminals for potential equalization | 4 |
| Infusion stand for solutions (4 hooks) | 1 |
| Universal Monitor double arm | 1 |
| Nurse call system | Yes |
| Night illumination | Yes |
| Power supply | 220 V ± 10 %, 50/60 Hz: power cable |
| Optional accessories | Oxygen flow meter with humidifier (autoclavable): 1 pc Vacuum ejector - complete with secretion collection tank (1 litre, autoclavable): 2 pc |
| Parameter | Value |
|---|---|
| Technical Parameters | Bed Head Unit 3 |
| Type | 1500 MM Horizontal Hospital Bed Head Unit |
| Gas panel lenght | 1200 mm-1500 mm, or cunstomized |
| End cover | 2 pcs |
| LED Light | 1 |
| Nurse Call System | 1pcs, optional with monitor |
| AGSS | Optional |
| Parameter | Value |
|---|---|
| Technical Parameters | Bed Head Unit 1 |
| Type | 1500 MM Horizontal Hospital Bed Head Unit |
| Gas panel lenght | 1200 mm-1500 mm, or customized |
| End cover | 2 pcs |
| LED Light | 1 |
| Nurse Call System | 1 pcs, optional with monitor |
| AGSS | Optional |
| Parameter | Value |
|---|---|
| Technical Parameters | Bed Head Unit 4 |
| Type | 1500 MM Horizontal Hospital Bed Head Unit |
| Gas panel lenght | 1200 mm-1500, or customized |
| End cover | 2 pcs |
| LED Light | 1 |
| Nurse Call System | 1 pcs, optional with monitor |
| AGSS | optional |
| Parameter | Value |
|---|---|
| Technical Parameters | 1500 MM Bed Head Unit |
| Gas panel lenght | 1200 mm-1500 mm, or customized |
| End cover | 2 pcs |
| LED Light | 1 |
| Nurse Call System | 1 pcs, optional with monitor |
| AGSS | Optional |
Bed Head Panel Layout for Hospital Rooms
Buyers often use bed head panel and bed head unit interchangeably for the same wall-mounted bedhead service assembly, so a request written with either term usually covers products sold under both names. There is no universal layout: panel length, the mix of gas outlets and electrical sockets, nurse call provision and lighting change with the model and with the room.
Planning a bed head panel for hospitals starts with the bed position and the wall behind it. Each bed head needs a clear zone, and in shared rooms the services are usually split left and right of a central point. Wall coordination follows: structural wall, finished wall surface and panel depth all have to meet at the planned height. Service routing for gas pipe, electrical conduit and data cable is settled before the wall is closed.
The specification tables on this page show which columns change between models, including gas outlets, end cover, LED light and nurse call. Where a room calls for a different arrangement, describe it in the inquiry so the configuration and the quotation follow the ward requirement.
Hospital Project Planning
Contractors and hospital buyers confirming a bed head unit for a hospital project coordinate a short list of items before ordering: room layout and bed positions, wall structure and fixing points, the route of gas and electrical services, and who installs and connects the finished unit on site. Leaving any of these open creates rework at the wall. The project-specific configuration for the models on this page is confirmed through the inquiry form or the sales contact.
Huifeng Medical has more than 100 employees, 3 factories and an R&D team of 11-20 people. More than 90% of production is exported, sales cover more than 50 countries, and the main markets include North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, the Middle East, Eastern Asia and Western Europe. OEM and ODM services are available alongside the HFMED brand, with terms confirmed per quotation, as described on the OEM and ODM page.
Quotation and Delivery for Ward Equipment Orders
Orders follow a plain sequence: the buyer sends the equipment list and quantities, Huifeng Medical prepares a quotation, production is scheduled, the goods are inspected and packed, and shipping is arranged. Average lead time is within 15 working days in peak and off seasons, with actual timing confirmed in each quotation.
Payment terms include L/C, T/T, PayPal, Western Union and MoneyGram, and supported Incoterms include FOB, CFR, CIF, DAP, DDP, FCA and EXW; both are confirmed per quotation. Send the room schedule through the contact page to start a quotation for a ward or ICU project.
How an order runs
- Send your requirements
- The equipment you need, the model or configuration, the quantity and the project or destination.
- Quotation
- Huifeng Medical replies with a quotation that confirms the model, configuration, MOQ, lead time and terms.
- MOQ and lead time
- For many listed models the minimum order quantity starts from 1 piece; the average lead time is within 15 working days. The MOQ, selling unit and timing for each order are confirmed in the quotation.
- Payment and Incoterms
- L/C, T/T, PayPal, Western Union and MoneyGram are accepted, with Incoterms such as FOB, CFR, CIF, DAP, DDP, FCA and EXW, confirmed per quotation.
- Production and shipping
- After confirmation the equipment is produced, inspected and packed for export, then shipped on the agreed terms.
Request a quotation
Send the model or configuration you need, the quantity and your project or destination.
Or write to sales@surgicallightmanufacturer.com