Orthopedic Operating Table Selection for Hospitals and Project Contractors
An orthopedic operating table is chosen around the procedures planned, the positions required, the access the surgical team needs and the room workflow. Huifeng Medical supplies operating tables and traction frames to hospitals, distributors and project contractors, with configuration and terms set in each quotation.
Request a quote for this equipment
- Established
- 1992
- Production lines
- More than 10
- Sales
- More than 50 countries

What to Check When Selecting an Orthopedic Operating Table
Buyers selecting an orthopedic operating table for an operating room project weigh a short set of factors: the mix of procedures the room will host, the positions and access the surgical team needs, how the table moves and how its base or column is built, the accessory rails and attachment interfaces on the table top, and the workflow around the table, from staff placement to how equipment enters the room.
A general operating table used with orthopedic attachments and a table configured for orthopedic work serve different purposes, and the choice follows the procedure mix, the positioning requirements and the accessory interfaces the team already uses. Each model on this page has its own specification table, so compare them individually rather than assuming the specification of any model covers the whole range.

Black tabletop on offset white pedestal 
Segmented tabletop with supports and cranks
Orthopedic operating table models and specifications
| Parameter | Value |
|---|---|
| Material | Metal |
| Type | Manual Bed |
| Folded | Unfolded |
| Model NO. | HFMH3008 AB With Kidney Bridge |
| Using Ambient | Hospital |
| Numbers of Function | Five-function |
| Lenth/Width | 2010 mm/500mm |
| Elevation(up/Down) | 760mm/1010 mm |
| Trendelenburg | 22 |
| Reverse Trendelenburg | 22 |
| Lateral Tilt(Left/Right) | 20/20 |
| Head Rest(up/Down) | 60/70 |
| Kidney Bridge up | 135 |
| Kidney Bridge up Width | 120mm |
| Parameter | Value |
|---|---|
| Material | Metal |
| Type | Orthopedic Bed |
| Folded | Unfolded |
| Model NO. | HFEOT99C |
| Using Ambient | Hospital |
| Numbers of Function | Five-function |
| Length | 1960 mm |
| Width | 500mm |
| Elevation(up/Down) | 690/1100 mm |
| Metal | 304 Stainless Steel |
| Trendelenburg/ Reverse Trendelenburg | 30/30 |
| Head Rest(up and Down) | 40/90 |
| Emergency Time | 8 Hrs |
| Parameter | Value |
|---|---|
| Type | 1005 Orthopedic Traction Frame |
| Traction Frame Length | 1860 mm |
| Traction Frame Width | 530mm |
| Traction Frame Height | ≤860mm |
| Lifting range | ≥320mm |
| Traction range | ≥200mm |
| Foot Plate Traction range | ≥200mm |
| Knee Crutch Lowest Elevation | ≤900mm |
| Traction range: rotation (up & down) | 120° |
| Horizontal evagination of boby frame | ≥180° |
| Parameter | Value |
|---|---|
| Type | 1006 Orthopedic Traction Frame |
| Traction Frame Length | 1860 mm |
| Traction Frame Width | 530mm |
| Traction Frame Height | ≤860mm |
| Lifting range | ≥320mm |
| Traction range | ≥200mm |
| Foot Plate Traction range | ≥200mm |
| Knee Crutch Lowest Elevation | ≤900mm |
| Traction range: rotation (up & down) | 120° |
| Horizontal evagination of boby frame | ≥180° |
| Parameter | Value |
|---|---|
| Technical Parameters | 1007 Orthopedic Traction Frame |
| Traction length | 1950 mm |
| Traction width | 560-610mm |
| Seat plate minimum height | ≤670mm |
| Foot shoes displacement | ≥220mm |
| Adjustment of the foot shoes’ angle range | ≥90° |
| Lift crank handle | 1 piece |
| Straight cylinder holder | 1 piece |
Orthopedic Table Configurations
An orthopedic surgical table can follow different buying routes. A general operating table fitted with orthopedic attachments suits departments that already hold those attachments; a table configured for orthopedic work from the start suits a room built around that procedure mix. The right route depends on the procedure mix, the positioning requirements and the accessory interfaces in use. Functions differ between models, so confirm the selected configuration in the quotation.
Whether a particular orthopedic surgery table supports different positions and workflows depends on the procedures planned, the positioning requirements, the attachment interfaces and the room layout. A table set up for a given procedure set may not cover every need in every room. Buyers confirm the configuration, the attachments and the workflow fit in the quotation.
The range includes an orthopedic stainless steel operating table, radiolucent orthopedic C arm compatible operating tables and traction frames; the wider surgical table range covers other room setups.
Spine Surgery Table Planning
Spine surgery planning starts from the positions the team needs, the access required around the table and any imaging the room will use. Buyers then check the table’s adjustment range and accessory interfaces against the specification tables on this page. Imaging compatibility is not attributed to the range as a whole; where a model specification states it, that model is the one to review.
A spine surgery table is selected for different spine procedures by matching procedure and positioning needs to the table’s articulation and attachment interfaces, then checking the room’s imaging and workflow requirements. Keep the assessment model-specific: read the specification tables for the models under consideration and use the quotation to confirm the configuration and accessories.
Pneumatic Tourniquet Planning for Orthopedic Surgery
A pneumatic tourniquet is a separate device category used in limb surgery, not a feature of a table. Planning runs alongside the table decision and covers the cuff type, the control unit, the tubing and how the device fits the room workflow: where it is stored, how the lines reach the field and who sets it up before the case.
Huifeng Medical supplies pneumatic tourniquets within its product range. The tourniquet configuration and its quotation are confirmed separately from the table, so the two are specified together at project level and ordered as their own line items.
Traction Frames and Accessories for Orthopedic Tables
Orthopedic traction frames are separate units that work alongside an orthopedic table during limb procedures.
Huifeng Medical was established in 1992 and works through the SHANGYI and HFMED brands, with 3 factories each focused on a different product line. Sales cover more than 50 countries, and more than 90% of production is exported. OEM and ODM services are available, with terms confirmed in the quotation.
How an order runs
- Send your requirements
- The equipment you need, the model or configuration, the quantity and the project or destination.
- Quotation
- Huifeng Medical replies with a quotation that confirms the model, configuration, MOQ, lead time and terms.
- MOQ and lead time
- For many listed models the minimum order quantity starts from 1 piece; the average lead time is within 15 working days. The MOQ, selling unit and timing for each order are confirmed in the quotation.
- Payment and Incoterms
- L/C, T/T, PayPal, Western Union and MoneyGram are accepted, with Incoterms such as FOB, CFR, CIF, DAP, DDP, FCA and EXW, confirmed per quotation.
- Production and shipping
- After confirmation the equipment is produced, inspected and packed for export, then shipped on the agreed terms.
Request a quotation
Send the model or configuration you need, the quantity and your project or destination.
Or write to sales@surgicallightmanufacturer.com