Huifeng MedicalRequest a quoteQuote

Hydraulic Operating Table Range for Hospitals and Projects

Huifeng Medical manufactures hydraulic operating tables and a broader range of surgical tables for hospitals, distributors and project contractors. Models are supplied under the HFMED and SHANGYI brands from Shanghai, with the company established in 1992.

Request a quote for this equipment

Established
1992
Production lines
More than 10
Sales
More than 50 countries
Black sectional table with upright supports

Hydraulic Operating Table Range for Hospitals and Projects

A hydraulic operating table is a surgical table whose adjustment movements are driven by hydraulic actuation rather than by manual cranking or electric motors. Hydraulic actuation is a drive method, not a fixed specification, so the term alone does not fix a table’s dimensions, positions or controls. For a hospital, distributor or project contractor, specification starts with the surgical specialty and the positions the surgical team needs, then moves to the table dimensions and load information given for the model under review, the control type where stated, and the operating room layout and service access around the table.

The range on this page covers the Hydraulic Operating Table, the Hydraulic Surgery Table and the Surgical Chair, alongside the Manual Power Hospital Surgical Operating Table, the Multi-Purpose Manual Operating Table and the General Surgery Ot Table. Each model has its own specification table showing the movements and ranges for that model. Projects that mix drive types can also draw on surgical tables and electric operating tables.

Huifeng Medical was established in 1992 and promotes the SHANGYI and HFMED brands. The company became a joint-stock company in 2018, joined the Shanghai Medical Device Industry Association in 2000 and has exported since 2008. More than 90% of production is exported, sales cover more than 50 countries, and the company runs 3 factories, each focused on a different product line, with more than 100 employees, an R&D team of 11-20 people and above 10 production lines.

Hydraulic operating table models and specifications

Manual Power Hospital Surgical Operating Table
ParameterValue
MaterialMetal
TypeManual Bed
FoldedUnfolded
Model NO.HFMH2001
Using AmbientHospital
Numbers of FunctionFive-function
Operation Theatre Table Driving ForceMechanically
Operation Theatre Table Length/Width1970 mm/500mm
Elevation(up/Down)750mm/970mm
Operation Theatre Table Trendelenburg22°
Reverse Trendelenburg22°
Lateral Tilt(Left/Right)18°/18°
Head Rest(up/Down)45°/90°
Operation Theatre Table Leg Plate(Down)90°
Back Plate(up/Down)75°/15°
Operation Theatre Table Kidney Bridge up120mm
Multi-Purpose Manual Operating Table
ParameterValue
MaterialMetal
TypeManual Bed
FoldedUnfolded
Model NO.HFMS3001 A
Using AmbientHospital
Numbers of FunctionFive-function
Hospital Operation Table Length/Width2080 mm/480mm
Hospital Operation Table Driving ForceMechanically
Elevation(up/Down)760mm/1010 mm
Hospital Operation Table Trendelenburg30°
Reverse Trendelenburg20°
Head Rest(up/Down)45°/90°
Hospital Operation Table Leg Plate(Down)90°
Back Plate(up/Down)75°/18°
Kidney Bridge up120mm
Operating Room Table
ParameterValue
TypeHFMH3008 A
Tabletop Length2080 mm
Tabletop Width480mm
Elevation (up/down)790mm/1040 mm
Trendelenburg25°
Reverse trendelenburg25°
Lateral Tilt20°/20°
Heat Plate (up/down)30°/90°
Leg Plate (up/down)90°
Back Plate (up/down)90°/10°
Kidney bridge elevation120mm
General Surgery Ot Table
ParameterValue
TypeHFMH3008 AB No waist bridge
Tabletop Length2010 mm
Tabletop Width500mm
Elevation (up/down)760mm/1010 mm
Trendelenburg22°
Reverse trendelenburg22°
Lateral Tilt20°/20°
Heat Plate (up/down)60°/70°
Leg Plate (up/down)85°/90°
Back Plate (up/down)75°/15°
Hydraulic Operating Table
ParameterValue
TypeHFMH600
Lenth/width2000 mm/480mm
Elevation (up/down)700mm/1000 mm
Trendelenburg25°
Reverse Trendelenburg30°
Lateral Tilt20/°20°
Head rest (up/down)50°/60°
Leg Plate (up/down)90°/ 90°
Back Plate (up/down)90°/10°
Kidney bridge elevation120mm
Hydraulic Surgery Table
ParameterValue
TypeHFMH3008 D
Tabletop Length2080 mm
Tabletop Width480mm
Height Adjustment790-1040 mm
Trendelenburg±25 degree
Lateral Tilt±20 degree
Back section adjustmentUp: 90 / down: 10 degree
Head board adjustmentUp: 30 / down: 90 degree
Leg board adjustment (manual)Down: 90 degree
Kidney elevator (manual)120mm
Surgical Chair
ParameterValue
Chair top diameter420mm
Minimum height460mm(chair top)
Elevation range140mm

How Hydraulic Operating Tables Work

In common industry usage, OT table means operating table, so an OT table hydraulic description refers to how the table is driven rather than to a size, position range or control layout. In practice, a hydraulic operating table uses fluid moved under pressure by a pump to raise, lower or tilt sections of the tabletop, with controls that release and lock each movement. Because configurations vary by model, confirm which movements are hydraulic and which are manual or otherwise controlled in the specification table for each model, then request a quotation for the exact configuration.

An operating table hydraulic system should be specified from the model rather than from the category. Configurations vary between models, so read the specification table for each model on this page, note the dimensions, elevation and tilt values it gives, and match those to the positions the surgical team works in. Request a quotation so the configuration, controls and accessories are confirmed for the project.

  • Which movements are hydraulic, manual or otherwise controlled for the model under review
  • Tabletop dimensions, elevation and tilt values as given for that model
  • The positions the surgical team uses during a typical operating list
  • Room layout, movement envelope and service access around the table
  • Configuration and accessory details confirmed in a quotation

Selecting a Hydraulic Table for a Surgical Department

Selection begins with the specialty and the positions a team uses. General surgery, orthopaedics and gynaecology place different demands on tabletop length and width, on section adjustment and on tilt, and a table bought for a general theatre may not suit a specialty list. Huifeng Medical supplies orthopedic operating tables and gynaecological tables as separate models, so a department can be equipped with tables matched to its own work.

Room layout and service access belong in the same review. Access for adjustment and routine service deserves the same attention, because a table placed tight against a wall or fixed equipment is harder to work with.

Quotation, OEM/ODM and Delivery for Operating Table Orders

Average lead time is within 15 working days in both peak and off seasons, with actual timing confirmed in each quotation. Accepted payment terms include L/C, T/T, PayPal, Western Union and MoneyGram, and supported Incoterms include FOB, CFR, CIF, DAP, DDP, FCA and EXW, confirmed per quotation.

OEM and ODM services are available alongside the HFMED and SHANGYI brands, with terms confirmed per quotation. The normal service steps are: send the equipment list and quantities; receive a quotation; production; inspection and packing; then shipping. The operating table buying guide covers specification questions, OEM/ODM covers custom work, and the contact page takes project enquiries.

How an order runs

Send your requirements
The equipment you need, the model or configuration, the quantity and the project or destination.
Quotation
Huifeng Medical replies with a quotation that confirms the model, configuration, MOQ, lead time and terms.
MOQ and lead time
For many listed models the minimum order quantity starts from 1 piece; the average lead time is within 15 working days. The MOQ, selling unit and timing for each order are confirmed in the quotation.
Payment and Incoterms
L/C, T/T, PayPal, Western Union and MoneyGram are accepted, with Incoterms such as FOB, CFR, CIF, DAP, DDP, FCA and EXW, confirmed per quotation.
Production and shipping
After confirmation the equipment is produced, inspected and packed for export, then shipped on the agreed terms.

Request a quotation

Send the model or configuration you need, the quantity and your project or destination.

Or write to sales@surgicallightmanufacturer.com

* Required