Manual Hospital Bed Selection for Hospitals and Projects
Huifeng Medical supplies crank-operated ward bed ranges for hospital wards and project contracts, with model-specific configurations. Buyers can compare adjustment functions, frame details and accessories, then confirm every commercial term in a quotation.
Request a quote for this equipment
- Established
- 1992
- Production lines
- More than 10
- Sales
- More than 50 countries

Manual Hospital Bed Selection Factors
A manual hospital bed is a crank-operated adjustable bed for ward or facility use. For a ward or project, check the intended use, the adjustment functions each model provides, frame and siderail details where the model’s own specification table states them, and room access and delivery planning. The models on this page have different crank arrangements, so compare the specification tables before choosing a configuration for a ward.
Each name points to a different adjustment and configuration scope; use its own specification table for details.
Other models are the Economic and Reliable 2-Crank Manual Hospital Bed; the 3 Functions Manual Crank Hospital Bed; the Medical Equipment Metal 1 Crank Manual Hospital Bed; and the Easy Use Two Function Manual Hospital Bed. Compare their own crank functions, frame details, siderails and castor information in the specification tables on this page rather than applying a model’s parameters to another model.
For a ward or project purchase, define the adjustment tasks staff will perform, check corridor and door access for delivery, and plan how beds will be moved into rooms. Huifeng Medical confirms these terms per quotation, so the selected bed, accessories and delivery route can be reviewed together. For wards that require powered adjustment, see electric hospital beds.
Manual hospital bed models and specifications
| Parameter | Value |
|---|---|
| Material | Metal |
| Type | Manual |
| Folded | Unfolded |
| Model NO. | TN-828B |
| Using Ambient | Hospital |
| Numbers of Function | Two-function |
| Power Source | Manual |
| Length/Width | 2120 mm/970mm |
| Height | 530mm |
| Back-Rest Lifting | 0-80°(±5°) |
| Knee-Rest Lifting | 0-40°(±5°) |
| Siderails | Aluminium |
| Manual Crank Spring Tensioning System | 1PC |
| I.V Drip | 1PC |
| Castor Diameter | 125mm |
| Parameter | Value |
|---|---|
| Material | Metal |
| Type | Manual |
| Folded | Unfolded |
| Model NO. | TN-839 |
| Using Ambient | Hospital |
| Numbers of Function | Three-function |
| Power Source | Manual |
| Length/Width | 2120 mm/970mm |
| Elevation(up/Down) | 450mm/700mm |
| Back-Rest Lifting | 0-80°(±5°) |
| Knee-Rest Lifting | 0-40°(±5°) |
| Siderails | Aluminium |
| Manual Crank Spring Tensioning System | 1PC |
| I.V Drip | 1PC |
| Castor Diameter | 125mm |
| Parameter | Value |
|---|---|
| Material | Metal |
| Type | Manual |
| Folded | Unfolded |
| Model NO. | TN-828A |
| Using Ambient | Hospital |
| Numbers of Function | Two-function |
| Power Source | Manual |
| Length/Width | 2120 mm/970mm |
| Height | 530mm |
| Back-Rest Lifting | 0-80°(±5°) |
| Knee-Rest Lifting | 0-40°(±5°) |
| Siderails | Aluminium |
| Manual Crank Spring Tensioning System | 1PC |
| I.V Drip | 1PC |
| Castor Diameter | 125mm |
| Parameter | Value |
|---|---|
| Material | Metal |
| Type | Manual |
| Folded | Unfolded |
| Model NO. | TN-838A |
| Using Ambient | Hospital |
| Numbers of Function | Three-function |
| Power Source | Manual |
| Length/Width | 2120 mm/970mm |
| Elevation(up/Down) | 450mm/700mm |
| Back-Rest Lifting | 0-80°(±5°) |
| Knee-Rest Lifting | 0-40°(±5°) |
| Siderails | Aluminium |
| Manual Crank Spring Tensioning System | 1PC |
| I.V Drip | 1PC |
| Castor Diameter | 125mm |
| Parameter | Value |
|---|---|
| Material | Metal |
| Type | Manual |
| Folded | Unfolded |
| Model NO. | TN-818B |
| Using Ambient | Hospital |
| Numbers of Function | One Function |
| Power Source | Manual |
| Length/Width | 2120 mm/970mm |
| Height | 530mm |
| Frame | Steel Tube |
| Surface Treatment | Electrostatic Powder Coating |
| Siderails | Aluminium |
| Immovable Legs | 2sets |
| I.V Drip | 1PC |
| Castor Diameter | 125mm |
| Parameter | Value |
|---|---|
| Material | Metal |
| Type | Manual |
| Folded | Unfolded |
| Model NO. | HF-838A |
| Using Ambient | Hospital |
| Numbers of Function | Three-function |
| Power Source | Manual |
| Length/Width | 2120 mm/970mm |
| Elevation(up/Down) | 450mm/700mm |
| Back-Rest Lifting | 0-80°(±5°) |
| Knee-Rest Lifting | 0-40°(±5°) |
| Siderails | Aluminium |
| Manual Crank Spring Tensioning System | 1PC |
| I.V Drip | 1PC |
| Castor Diameter | 125mm |
| Parameter | Value |
|---|---|
| Material | Metal |
| Type | Manual |
| Folded | Unfolded |
| Model NO. | TN-808A |
| Using Ambient | Hospital |
| Numbers of Function | One Function |
| Power Source | Manual |
| Length/Width | 2120 mm/970mm |
| Height | 530mm |
| Frame | Steel Tube |
| Surface Treatment | Electrostatic Powder Coating |
| Siderails | Aluminium |
| Immovable Legs | 2sets |
| I.V Drip | 1PC |
| Castor Diameter | 125mm |
| Parameter | Value |
|---|---|
| Material | Metal |
| Type | Manual |
| Folded | Unfolded |
| Model NO. | TN-808 |
| Using Ambient | Hospital |
| Numbers of Function | One Function |
| Power Source | Manual |
| Length/Width | 2120 mm/970mm |
| Height | 530mm |
| Frame | Steel Tube |
| Surface Treatment | Electrostatic Powder Coating |
| Siderails | Aluminium |
| Immovable Legs | 2sets |
| I.V Drip | 1PC |
| Castor Diameter | 125mm |
Manual Bed Functions and Configuration
In this section, manual patient bed is used as a synonym for the manual ward beds on this page. The models are manual patient beds with crank-based adjustment where their own specification tables state it. Compare each model’s own functions and configuration, including back-rest and knee-rest adjustment, elevation, siderails and castors, only as that model’s table presents them. For the intended ward setup, request a quotation with the preferred model and quantity.
To specify a hospital manual bed for a ward or project purchase, start with the ward layout and the adjustment tasks staff will carry out. Check frame and siderail details only where the chosen model’s own specification table states them. Plan room access, turning space and delivery routes before confirming the model. Do not assign a model’s height, castor size or siderail arrangement to the whole range; each configuration stands on its own table.
Crank-based adjustment suits wards where staff prefer a mechanical bed with no powered drive. When comparing models, match the crank arrangement, the frame construction and the accessory points shown for each bed to the ward routine. For project orders, include the room schedule and required quantities in the inquiry so the quotation can cover the selected configuration.
Sourcing and Project Quotation
Huifeng Medical’s average lead time is within 15 working days in peak and off seasons; actual timing is confirmed in each quotation.
Accepted payment terms include L/C, T/T, PayPal, Western Union and MoneyGram, confirmed per quotation. Supported Incoterms include FOB, CFR, CIF, DAP, DDP, FCA and EXW, confirmed per quotation. Huifeng Medical offers OEM and ODM services as well as its own HFMED brand; OEM/ODM terms are confirmed per quotation. Use the inquiry form or sales email for quotation requests on the models shown on this page; for OEM and ODM terms, see OEM/ODM.
Huifeng Medical was established in 1992, became a joint-stock company in 2018, and operates 3 factories, each focused on a different product line. Its sales cover more than 50 countries, and more than 90% of production is exported. For project contractors, these facts matter when matching a manual bed supply plan to a multi-room delivery schedule and when reviewing the wider hospital beds range for ward equipment.
How an order runs
- Send your requirements
- The equipment you need, the model or configuration, the quantity and the project or destination.
- Quotation
- Huifeng Medical replies with a quotation that confirms the model, configuration, MOQ, lead time and terms.
- MOQ and lead time
- For many listed models the minimum order quantity starts from 1 piece; the average lead time is within 15 working days. The MOQ, selling unit and timing for each order are confirmed in the quotation.
- Payment and Incoterms
- L/C, T/T, PayPal, Western Union and MoneyGram are accepted, with Incoterms such as FOB, CFR, CIF, DAP, DDP, FCA and EXW, confirmed per quotation.
- Production and shipping
- After confirmation the equipment is produced, inspected and packed for export, then shipped on the agreed terms.
Request a quotation
Send the model or configuration you need, the quantity and your project or destination.
Or write to sales@surgicallightmanufacturer.com