ICU Bed Information for Hospitals, Distributors and Project Contractors
Huifeng Medical supplies ICU bed models for hospitals, distributors and project contractors, with electric and manual options, room-planning input and quotation-based configuration for intensive care projects.
Request a quote for this equipment
- Established
- 1992
- Production lines
- More than 10
- Sales
- More than 50 countries

ICU Bed Range and Buyer Introduction
An ICU bed is an adjustable hospital bed used in intensive care settings. Huifeng Medical offers electric and manual beds for hospitals, distributors and project contractors, including multi-function electric beds, folding electric beds for ICU rooms, electric and manual crank beds, adjustable electric beds and a patient hospital bed. Review the selection factors in the sections below, then request a quotation for the exact configuration and project requirements.
For projects that specify multiple ICU beds, the range covers electric and manual operation across different function variants; see the wider hospital beds and electric hospital beds categories for related planning. Each product name and specification table apply to that model only, and the quotation confirms the selected bed configuration.

Blue-accented split rails and footboard display 
Articulated bed with footboard display and castors
ICU bed models and specifications
| Parameter | Value |
|---|---|
| Technical Parameters | HF-818 |
| 2. Manual crank spring tensioning system | |
| 3. Urine hooks, I.V drip | |
| 4. 125mm dia. Noiseless castors with brake | |
| 2. The bed platform is made of cold roll steel sheet, shaped at one time | |
| 3. The frame is welded by steel tube, stable and reliable; surface treatment: electrostatic powder coating | |
| 4. Aluminium folding sidrails, easily operated | |
| 5. ABS hand crank which uses over loading protect system | |
| 6. 4 truckles use full breaking device | |
| Function | 1. Back-rest lifting angle is 0-80° (±5°) |
| Parameter | Value |
|---|---|
| Technical Parameters | HFBIN-4000 A / B / C |
| Electrical requirement | 220V 50Hz |
| Power consumption | 450VA |
| Humidity control range | 30-90% RH |
| Humidity Alarm | ±15% RH |
| Humidly display range | 0-99.9% RH |
| Parameter | Value |
|---|---|
| Material | Metal |
| Type | Electric Bed |
| Folded | Unfolded |
| Model NO. | TN-821 |
| Using Ambient | Hospital |
| Numbers of Function | Two-function |
| Power Source | Electricity |
| Length/Width | 2120 mm/970mm |
| Height | 530mm |
| Back-Rest Lifting | 0-80°(±5°) |
| Knee-Rest Lifting | 0-40°(±5°) |
| Motors | 2PCS |
| Control Box | 1PC |
| Handset | 1PC |
| Castor Diameter | 125mm |
| Parameter | Value |
|---|---|
| Material | Metal |
| Type | Electric and Manual |
| Folded | Unfolded |
| Model NO. | TN-858 |
| Using Ambient | Hospital |
| Numbers of Function | Five-function |
| Power Source | Electricity |
| Length/Width | 2120 mm/970mm |
| Elevation(up/Down) | 500mm/700mm |
| Back-Rest Lifting | 0-80°(±5°) |
| Knee-Rest Lifting | 0-40°(±5°) |
| Motors | 4PCS |
| Control Box | 1PC |
| Handset | 1PC |
| Castor Diameter | 125mm |
| Parameter | Value |
|---|---|
| Material | Metal |
| Type | Electric and Manual |
| Folded | Unfolded |
| Model NO. | TN-835 |
| Using Ambient | Hospital |
| Numbers of Function | Three-function |
| Power Source | Electricity and Manual |
| Length/Width | 2120 mm/970mm |
| Elevation(up/Down) | 450mm/700mm |
| Back-Rest Lifting | 0-80°(±5°) |
| Knee-Rest Lifting | 0-40°(±5°) |
| Control Box | 1PC |
| Handset | 1PC |
| Castor Diameter | 125mm |
| Parameter | Value |
|---|---|
| Material | Metal |
| Type | Electric Bed |
| Folded | Unfolded |
| Model NO. | TN-836T |
| Using Ambient | Hospital |
| Numbers of Function | Three-function |
| Power Source | Electricity |
| Length/Width | 2120 mm/970mm |
| Elevation(up/Down) | 450mm/700mm |
| Back-Rest Lifting | 0-80°(±5°) |
| Knee-Rest Lifting | 0-40°(±5°) |
| Motors | 3PCS |
| Control Box | 1PC |
| Handset | 1PC |
| Castor Diameter | 125mm |
| Parameter | Value |
|---|---|
| Model NO. | TN-836 |
| Material | Metal |
| Type | Electric Bed |
| Folded | Unfolded |
| Using Ambient | Hospital |
| Numbers of Function | Three-function |
| Power Source | Electricity |
| Length/Width | 2120 mm/970mm |
| Elevation(up/Down) | 450mm/700mm |
| Back-Rest Lifting | 0-80°(±5°) |
| Knee-Rest Lifting | 0-40°(±5°) |
| Motors | 3PCS |
| Control Box | 1PC |
| Handset | 1PC |
| Castor Diameter | 125mm |
| Parameter | Value |
|---|---|
| Model NO. | TN-858 |
| Material | Metal |
| Type | Electric and Manual |
| Folded | Unfolded |
| Using Ambient | Hospital |
| Numbers of Function | Five-function |
| Power Source | Electricity |
| Length/Width | 2120 mm/970mm |
| Elevation(up/Down) | 500mm/700mm |
| Back-Rest Lifting | 0-80°(±5°) |
| Knee-Rest Lifting | 0-40°(±5°) |
| Motors | 4PCS |
| Control Box | 1PC |
| Handset | 1PC |
| Castor Diameter | 125mm |
Intensive Care Bed Configurations and Functions
When selecting an intensive care hospital bed, buyers can compare adjustable functions where stated for the chosen model, side rail design, manual or electric operation, mobility, mattress platform access and room layout. Huifeng Medical supplies electric and manual beds in the ICU bed range, and exact dimensions, functions and accessories are confirmed in the quotation for the selected model.
Configuration review should also cover the control method, headboard and footboard arrangement, castor layout and access for bedside work and the equipment zone. Request a quotation with the room layout so the bed configuration can be confirmed for the project.
ICU Room Bed Selection Factors
For an ICU hospital bed project, collect the room layout, intended bed functions, manual or electric operation preference, side rail and headboard requirements, and mattress type before requesting a quotation. These inputs let Huifeng Medical match the selected ICU bed model and bedside accessories to the room and project scope.
Buyers should separate fixed room conditions from items that can be configured with the bed, such as control handset, castor type and side rail arrangement where available for the selected model. Send the project requirements through the contact page to request a quotation for the ICU room bed configuration.
Patient Bed Functions and Positioning
The product names on this page cover multi-function and electric or manual beds, but exact adjustment functions and controls are confirmed in the quotation for each selected model. Buyers reviewing an ICU patient bed should check positioning needs such as backrest, knee-rest and height only where the selected model’s quotation confirms them.
These points affect how staff move and adjust the bed in the room. Send the intended positioning requirements with the room plan and request a quotation for the ICU patient bed configuration.
Hospital ICU Project Planning
Contractors planning a hospital ICU layout should review room clearances, bed movement paths, bedside equipment zones and delivery access before finalizing an order. For the ICU bed models on this page, dimensions and Incoterms are confirmed per quotation, and Huifeng Medical can quote against the room schedule and equipment list.
Project planning should separate the bed delivery schedule from the room fit-out schedule so receiving, moving and placing the beds can be coordinated for the selected ICU bed. Supported Incoterms include FOB, CFR, CIF, DAP, DDP, FCA and EXW, confirmed per quotation.
IV Pole and Bedside Accessory Planning
An IV pole is a common bedside accessory in intensive care settings, but availability with a specific ICU bed must be confirmed for the selected model. Buyers should request a quotation for the bed and state whether an IV pole is needed, together with the required mounting method and compatibility with other bedside accessories.
Accessory planning can also cover the arrangement of the headboard, side rails and bedside equipment zone. The selected bed quotation should confirm which accessories are included and how they are positioned, so the room plan and delivery list stay aligned.
ICU Device and Bedside Equipment Integration
ICU device planning around the bed should consider the space and routes needed for bedside monitors, infusion pumps and other equipment. The bed quotation should be checked against the room and device layout so that the bedside zone is coordinated. For the models on this page, compatibility with the planned equipment is confirmed through the quotation.
A room layout and device schedule help confirm how the selected bed fits the planned bedside zone, including how an ICU medical device area is coordinated with the bed position.
Ordering ICU Beds Through Huifeng Medical
Huifeng Medical was established in 1992 and became a joint-stock company in 2018. The company promotes the SHANGYI and HFMED brands, runs 3 factories, has more than 100 employees, and sells to more than 50 countries; >90% of production is exported. OEM and ODM services are available, with terms confirmed per quotation.
The average lead time is within 15 working days in peak and off seasons; actual timing is confirmed in each quotation. Accepted payment terms include L/C, T/T, PayPal, Western Union and MoneyGram, and supported Incoterms include FOB, CFR, CIF, DAP, DDP, FCA and EXW, confirmed per quotation. Send the equipment list and quantities to start a quotation for ICU beds and related room equipment such as medical pendants.
How an order runs
- Send your requirements
- The equipment you need, the model or configuration, the quantity and the project or destination.
- Quotation
- Huifeng Medical replies with a quotation that confirms the model, configuration, MOQ, lead time and terms.
- MOQ and lead time
- For many listed models the minimum order quantity starts from 1 piece; the average lead time is within 15 working days. The MOQ, selling unit and timing for each order are confirmed in the quotation.
- Payment and Incoterms
- L/C, T/T, PayPal, Western Union and MoneyGram are accepted, with Incoterms such as FOB, CFR, CIF, DAP, DDP, FCA and EXW, confirmed per quotation.
- Production and shipping
- After confirmation the equipment is produced, inspected and packed for export, then shipped on the agreed terms.
Request a quotation
Send the model or configuration you need, the quantity and your project or destination.
Or write to sales@surgicallightmanufacturer.com