Medical Pendant for Operating Rooms and ICUs
Medical pendants bring gas, power and data connections from the ceiling to the point of use in operating rooms and ICUs. Huifeng Medical, established in 1992, manufactures bridge and dry-wet pendant systems under the HFMED and SHANGYI brands.
Request a quote for this equipment
- Established
- 1992
- Production lines
- More than 10
- Sales
- More than 50 countries
Medical Pendant for Operating Rooms and ICUs
In operating rooms the pendant keeps cables and hoses clear of the floor around the table; in ICUs it places power and monitoring connections beside the bed. Common forms are single-arm, double-arm, bridge and column configurations, and each form changes arm reach, equipment load and how weight is carried by the ceiling.
Selection starts with the room. The position of the operating table or ICU bed, the equipment that must stay within reach, the sockets and outlets required at each point and the routes staff take around the bed all shape the layout. Ceiling structure decides the mounting type: a bridge runs above the bed positions, a column unit hangs from a single point.
Huifeng Medical, established in 1992, manufactures medical pendants in Shanghai under the HFMED and SHANGYI brands and supplies hospitals, distributors and project contractors. The types on this page cover ICU ceiling bridge pendants, ICU bridge-type ceiling pendants with dry and wet sections, and ICU medical pendant bridge systems. Questions about arm reach, socket schedules, gas outlet positions and ceiling interfaces are answered through a quotation request; the ICU pendant guide covers room planning.
Medical pendant models and specifications
| Parameter | Value |
|---|---|
| Beam with light*1 | |
| Middle case with rocker arm | |
| Platform*2 | |
| Drawer*1 | |
| Infusion stand*1 | |
| 10A socket*7 | |
| Network socket*1 | |
| Ground terminal*1 | |
| Two-side housing arrangement | Platform*2 |
| 10A socket*6 | |
| Network socket*1 | |
| Drawer*1 | |
| Ground terminal*1 | |
| Infusion stand*1 | |
| Built-in LCD temperature display | |
| Beam length | 4.4m*5m |
| Parameter | Value |
|---|---|
| Material | Alloy |
| Shape | Square |
| Plating | Spraying Plastics |
| Model NO. | HFP-S/S+E |
| Color | Silver |
| Lighting | 2 |
| Electrical Socket | 12 (220V) |
| Dry Area | Ceiling Box*1,O2X2,VAC*1,Air*1shelf*2,Cable Pipe C |
| Wet Area | Column Length(L=700mm)*1,O2*1\VAC*1\Air*1; |
| Lengths(Mm) | 2000-3800 |
| Payload Gliders(Kg) | 100(220p) |
| Payload Shelf | 60(110p) |
| Opreating Force (Linear and Horizontal) | Max 50 |
| Brake Power (Linear and Horizontal) (N) | Max 100 |
| Parameter | Value |
|---|---|
| Three arms free rotation | |
| Wet section configuration | Platform*2 |
| Drawer*1 | |
| Infusion stand*1 | |
| 10A socket*7 | |
| Network socket*1 | |
| Dry section configuration | Platform*3 |
| Drawer*1 | |
| 10A socket*6 | |
| Network socket*1 | |
| Infusion stand*1 | |
| Telephone socket*1 |
| Parameter | Value |
|---|---|
| Beam with light*1 | |
| Platform*3 | |
| Drawer*1 | |
| Infusion stand*1 | |
| 10A socket*7 | |
| Network socket*1 | |
| Ground terminal*1 | |
| Built-in LCD temperature display | |
| Beam length | 1.8m*2.2m |
| Parameter | Value |
|---|---|
| Platform*3 | |
| Drawer*1 | |
| Infusion stand*1 | |
| 10A socket*7 | |
| Network socket*1 | |
| Ground terminal*1 | |
| Beam with light*1 | |
| Built-in LCD temperature display | |
| Beam length | 1.8m*2.2m |
| Parameter | Value |
|---|---|
| Beam with light*1 | |
| Wet section configuration | Platform*2 |
| Drawer*1 | |
| Infusion stand*1 | |
| 10A socket*7 | |
| Network socket*1 | |
| Ground terminal*1 | |
| Built-in LCD temperature display | |
| Dry section configuration | Platform*3 |
| 10A socket*6 | |
| Network socket*1 | |
| Telephone socket*1 | |
| Infusion stand*1 | |
| Drawer*1 | |
| Ground terminal*1 | |
| Beam length | 2.6m*3m |
| Parameter | Value |
|---|---|
| Material | Alloy |
| Shape | Square |
| Plating | Spraying Plastics |
| Model NO. | HFP-E |
| Lighting | 2 |
| Column Length | 1 (L=700mm) |
| Electrical Socket | 8 |
| Communication Socket | 1 |
| Shelf | 1 |
| Drawer | 1 |
| Stainless Steel Basket | 1 |
| Extension Arm | 1 |
| Stainless Steel Shelf | 1 |
| Parameter | Value |
|---|---|
| Type | Medical Pendant |
| Lighting | 2 |
| Model NO. | HFP-S |
| 1 Column Length | 700mm |
| Electrical Socket | 8 |
| Conmmunication Socket | RJ45 |
Ceiling Pendant Planning
A ceiling pendant is a ceiling-mounted medical supply unit used in hospital rooms, bringing power, gas and data connections from above the ceiling down to the bedside or table. Because the unit hangs over the working area, planning starts before the ceiling is closed: the fixing point, the beam or slab that carries it, the route of supply lines above the ceiling and the final position over the bed are settled together with the room layout and the equipment the room will hold.
Contractors can usefully share drawings early: where the bed or table sits, which side staff approach from, how many sockets, gas outlets and network points each section needs, and whether the unit must swing clear for movement. Ceiling conditions decide the mounting method, and the specification tables on this page set out the ceiling pendant types shown for ICU rooms. Project details and equipment needs can be sent for a quotation.
Bridge and Dry-Wet Pendant Configurations
Bridge pendants spread the supply points along a beam above the bed, so the dry and wet areas of an ICU bay can each carry their own sockets, drawers and infusion stands. In the medical ICU bridge-type pendant, the assembly is made up of a bridge, a dry section and a wet section, and the arms rotate freely so the sections can be moved between bed positions. Other bridge types on this page add platforms, network and telephone sockets, a built-in LCD temperature display and beam lighting.
Configuration flexibility differs by type. On the ICU medical bridge ceiling pendant, electrical sockets can be customized according to the client’s requests, so a project’s socket schedule can be followed. Its specification table covers material, plating, color, dry and wet area layout, lengths, payload figures for gliders and shelves, and the operating and braking force of arm movement.
- Beams with lighting, platforms and drawers
- Dry section and wet section socket groups
- Infusion stands, network sockets, telephone sockets and ground terminals
- Built-in LCD temperature display and column length
- Material, plating, shape and color
Ordering, OEM/ODM and Export Terms
Huifeng Medical was established in 1992, became a joint-stock company in 2018 and started exporting in 2008. More than 90% of production is exported and sales cover more than 50 countries. The company runs 3 factories, each focused on a different product line, above 10 production lines, more than 100 employees and an R&D team of 11-20 people.
Average lead time is within 15 working days in both peak and off seasons, with actual timing confirmed in each quotation. Accepted payment terms include L/C, T/T, PayPal, Western Union and MoneyGram, and supported Incoterms include FOB, CFR, CIF, DAP, DDP, FCA and EXW, both confirmed per quotation. OEM and ODM services are offered alongside the HFMED brand. For complete rooms, Huifeng also supplies ICU beds and bed head units; drawings and equipment lists go through the contact page.
How an order runs
- Send your requirements
- The equipment you need, the model or configuration, the quantity and the project or destination.
- Quotation
- Huifeng Medical replies with a quotation that confirms the model, configuration, MOQ, lead time and terms.
- MOQ and lead time
- For many listed models the minimum order quantity starts from 1 piece; the average lead time is within 15 working days. The MOQ, selling unit and timing for each order are confirmed in the quotation.
- Payment and Incoterms
- L/C, T/T, PayPal, Western Union and MoneyGram are accepted, with Incoterms such as FOB, CFR, CIF, DAP, DDP, FCA and EXW, confirmed per quotation.
- Production and shipping
- After confirmation the equipment is produced, inspected and packed for export, then shipped on the agreed terms.
Request a quotation
Send the model or configuration you need, the quantity and your project or destination.
Or write to sales@surgicallightmanufacturer.com