Pneumatic Tourniquet Cuff and Control Unit Models
Huifeng Medical manufactures pneumatic tourniquet sets for hospital operating rooms: the Double Cuff Pneumatic Tourniquet, the Automatic Pneumatic Tourniquet and the Manual Pneumatic Tourniquet. Each model has its own specification table on this page, covering cuff and control details for that unit.
Request a quote for this equipment
- Established
- 1992
- Production lines
- More than 10
- Sales
- More than 50 countries

Pneumatic Tourniquet Cuff and Control Unit Models
Huifeng Medical, established in 1992, manufactures pneumatic tourniquet sets for operating rooms and promotes the SHANGYI and HFMED brands. The models covered on this page are the Double Cuff Pneumatic Tourniquet, the Automatic Pneumatic Tourniquet and the Manual Pneumatic Tourniquet. Cuff and control characteristics are described for each model from its own specification table, so models can be compared without assuming that a component or setting carries across the group.
- Double Cuff Pneumatic Tourniquet — double cuff arrangement, described in its own specification table.
- Automatic Pneumatic Tourniquet — control unit model with its own parameter table.
- Manual Pneumatic Tourniquet — manual model with its own parameter table.
Hospital buyers, distributors and contractors bringing a pneumatic tourniquet into a theatre project can send an equipment list, cuff quantities and the intended department, and Huifeng Medical returns a quotation for the models that fit the requirement. Our operating room equipment list guide helps with the surrounding scope.

Digital tourniquet with coiled hoses and cuffs 
Manual tourniquet with analog gauge and cuffs
Pneumatic tourniquet models and specifications
| Parameter | Value |
|---|---|
| Ambient temperature | 5°C~40°C |
| Relative humidity | ≤80% |
| Atmospheric pressure | 800hPa~1060 hPa |
| External power supply | a.c.220V50Hz |
| Internal power supply | Output d.c.12V |
| Ambient temperature range | -10°C~40°C |
| Relative humidity range | ≤80% |
| Model: DZ-SS | |
| FEATURE | |
| Number of channels | Dual channel |
| Display configuration | Digital tube |
| Operation configuration | Mechanical buttons |
| Power type | External power supply or internal power supply |
| Host size | 255mm×232mm×210mm |
| Hemostatic cuff size (width×length) | Small (5x30cm), Medium (7x50cm), Large (8<80cm), Extra large (10x100cm) |
| Main material of hemostatic cuff | TPU polymer material |
| Parameter | Value |
|---|---|
| Technical Parameters | DZ-S |
| Power supply | 200±10%, 50Hz |
| Rated output | ≤18VA |
| Time Preset | 30m, 60m, 90m, 120m |
| Parameter | Value |
|---|---|
| Technical Parameters | QZ-I |
| Air pressure limit | 0-0.12MPA (positive) |
| Gross weight | 8kg |
Pneumatic Tourniquet Cuff Features
Cuff features follow the model. The name of the Double Cuff Pneumatic Tourniquet states a double cuff arrangement, and its specification table on this page sets out hemostatic cuff size as width × length together with the main material of the hemostatic cuff.
As general operating-room equipment, a cuff is a wrap that closes around a limb; a bladder inside it is inflated through tubing connected to the control unit, and a fastener holds the wrap in place. Buyers comparing units normally look at cuff size, cuff material, cuff quantities per theatre and how tubing and connectors are handled between procedures.
Control Unit and System Features
Control unit and system details are given per model. The specification table for the Double Cuff Pneumatic Tourniquet covers number of channels, display configuration, operation configuration, power type and host size, together with the external and internal power supplies named for that unit.
The Automatic Pneumatic Tourniquet table sets out technical parameters, power supply, rated output, pressure range, alarming time and time preset. The Manual Pneumatic Tourniquet table sets out technical parameters, air pressure limit and gross weight. Where a control or system feature needed for a project goes beyond a model’s table, include it in the quotation request and the configuration is confirmed there.
Cuff Sizing and Limb Site
No model on this page is put forward as a site-specific tourniquet; the models are the Double Cuff, the Automatic and the Manual Pneumatic Tourniquet. Cuff sizing and limb-site requirements are project-specific, so a request should state the intended site and the cuff dimensions required, and the configuration is confirmed in the quotation.
Buyers usually settle the cuff together with the control unit, the cuff quantities wanted per theatre and where the unit will be stored between procedures. Where a limb site or cuff dimension falls outside what a model’s specification table covers, state it in the request so the matching combination can be quoted.
Ordering Pneumatic Tourniquets for Hospital Projects
Average lead time is within 15 working days in both peak and off seasons, with actual timing confirmed per quotation. Payment terms include L/C, T/T, PayPal, Western Union and MoneyGram, and Incoterms include FOB, CFR, CIF, DAP, DDP, FCA and EXW, all confirmed in the quotation.
Huifeng Medical runs 3 factories, each focused on a different product line, and offers OEM and ODM work alongside its own HFMED brand, with terms confirmed per quotation. The usual service runs from equipment list and quantities to quotation, production, inspection and packing, then shipping. Start with OEM/ODM services or our contact options.
How an order runs
- Send your requirements
- The equipment you need, the model or configuration, the quantity and the project or destination.
- Quotation
- Huifeng Medical replies with a quotation that confirms the model, configuration, MOQ, lead time and terms.
- MOQ and lead time
- For many listed models the minimum order quantity starts from 1 piece; the average lead time is within 15 working days. The MOQ, selling unit and timing for each order are confirmed in the quotation.
- Payment and Incoterms
- L/C, T/T, PayPal, Western Union and MoneyGram are accepted, with Incoterms such as FOB, CFR, CIF, DAP, DDP, FCA and EXW, confirmed per quotation.
- Production and shipping
- After confirmation the equipment is produced, inspected and packed for export, then shipped on the agreed terms.
Request a quotation
Send the model or configuration you need, the quantity and your project or destination.
Or write to sales@surgicallightmanufacturer.com